Can I Use Pc3 12800 Instead Of Pc310600?

Can I use ddr3l RAM in ddr3 slot?

DDR3L modules are backwards compatible with DDR3 by design.

Manufacturers use the same integrated circuits for DDR3 and DDR3L.

The highest quality ICs are tested for operating at 1.35 volts and are branded as DDR3L if they run properly.

Other than that, there’s no difference between them..

What’s the difference between DIMM and Sodimm?

DIMMs are used in desktop computers and servers. A DIMM (133MM) is about twice as long as a SODIMM (67MM). DIMMs can carry features not normally found on SODIMMs such as ECC and REGISTERED. SODIMMs are used in notebook computers.

Is ddr4 faster than ddr3?

Faster data transfer speed DDR4-3200, the latest industrial DDR4 offering from ATP, transfers data about 70% faster than DDR3-1866, one of the fastest DDR3 versions available, for a big boost in theoretical peak performance.

Is pc3l the same as ddr3l?

Is DDR3L the same as PC3L? The DDR3L (DDR3 Low Voltage) standard is an addendum to the JESD79-3 DDR3 Memory Device Standard specifying low voltage devices. The DDR3L standard is 1.35V and has the label f fPC3L f f for its modules.

Can I use pc3 10600 instead of pc3 12800?

PC3-12800 works just fine as PC3-10600 speeds. Think of it as a car capable of going up to 120kmph on a 100kmph highway. It will work just fine. Regular DDR3 DIMMs are designed to work at 1.5 volt.

What is the difference between 10600 and 12800 RAM?

10600 is 1333 ddr3 and 12800 is 1600 ddr3. 1600 is a bit faster.

What does 1600MHz ddr3 mean?

double data rate type threeDDR3 is an abbreviation for double data rate type three synchronous dynamic random access memory, is a modern type of dynamic random access memory (DRAM) with a high bandwidth (“double data rate”) interface, and has been in use since 2007. 1600MHz is the speed of your front side bus on your PC motherboard.

How do I know if RAM is compatible?

Your computer’s motherboard will also determine RAM capacity, as it has a limited number of dual in-line memory module slots (DIMM slots) which is where you plug in the RAM. Consult your computer or motherboard manual to find this information. Additionally, the motherboard determines what kind of RAM you should pick.

Is 2rx8 better than 1rx8?

A = 1Rx8 means the memory chips are on one side of the RAM module and 2Rx8 means the memory chips are on both sides of the RAM module. Compatibility is generally not an issue in most cases. … On the other hand using a PC3L RAM in a PC3 RAM slot may damage it due to overvoltage.

Does Ram brand matter?

When the RAM has the same specs like size, speed, they have little differences in performance, even they have different brands. Different brands use different kinds of memory chips and materials. So, they are a little different in quality but not performance. So, ram brand does’t matter too much.

Can I mix ram with different voltages?

Brands. We have established that you definitely can’t mix generations of DRAM. And it’s not optimal to mix modules with different speeds, latency, or voltage.

What does pc3 12800 mean?

DDR3-1600 memory has a module classification of PC3-12800, which effectively means the peak data rate of the module is 12.8GB/sec (see table). That’s about a 17% improvement on memory bandwidth over DDR3-1333.

Can I replace pc3l with pc3?

3 Answers. PC3 is standard voltage (1.50V) where PC3L is low voltage (1.35V) – A system which requires PC3L cannot support PC3 RAM. PC3L RAM will work in a PC3 based system as it will run at the standard voltage and will inter-operate with PC3 RAM within the system.

Can I use 1.35 V instead of 1.5 V RAM?

Yes, you can use a low voltage RAM module, rated at 1.35 V or 1.25V with a normal RAM module rated at 1.5 V. The Low voltage RAMs (DDR3L) are backwards compatible so they would work with most of the CPU and Motherboard combinations.

Can I use 1333mhz and 1600MHz RAM together?

2 Answers. Yes, you can mix 1333 and 1600 MHz RAM sticks, however the system will downclock all RAM to the speed of the slowest stick. For best performance, try and buy RAM that is the same speed or faster.

Can I replace ddr3 with ddr4?

DDR4 RAM is not backwards compatible with DDR3 motherboards and vice versa. The notch has been moved to prevent accidental insertion of the wrong type of memory. You will not be able to change to DDR-4 .

What is the difference between pc3 and ddr3?

DDR3 stands for Double Data Rate type three but does not imply a specific frequency or bus rate. The PC3-xxxx designates the particular RAM’s speed rating and means that the memory certified as able to run at that bus speed. So DDR3 RAM PC3-1333 runs at 1333 MHz while the PC3-1066 runs at 1066 MHz.

Can I use pc3 RAM in pc3l slot?

Yes, your laptop supports DDR3 (PC3- refers to DDR3) SODIMM memory, if the PC3L memory which you have is SODIMM (204pin) then you can install it with out any issues else if it is DIMM (240-pin) then don’t even think about it.

Can I use 4gb and 8gb RAM together?

IE you can either use the 4GB RAM or the 8GB RAM but not both at the same time. Usually you can but it depends on the motherboard. There are chips which are 4GB and 8GB, in dual channel mode this will not work. … Sometimes you will have to swap the RAM slots since the detection has bugs.

Is 1.35 volts safe for RAM?

Most people would say 1.35V RAM is no problem at all and you should go for it, but if reliability is a high priority for you, 1.2V will be a touch safer. I’ve seen 1.25V RAM around too, which might be good. As far as clocks, I can’t imagine stuff in the 2800-3200 ballpark being a problem if the voltage isn’t.

Is ddr4 1.5 V Safe?

For daily usage the max recommended voltage is 1.50v , it is safe until 1.50v after that even 1.52v will have a detrimental effect on the dimms and also put a high strain over the other components eg.